Featured Post

High CMRR Instrumentation Amplifier (Schematic and Layout) design for biomedical applications

on
Instrumentation amplifiers are intended to be used whenever acquisition of a useful signal is difficult. IA’s must have extremely high input impedances because source impedances may be high and/or unbalanced. bias and offset currents are low and relatively stable so that the source impedance need not be constant. Balanced differential inputs are provided so that the signal source may be referenced to any reasonable level independent of the IA output load reference. Common mode rejection, a measure of input balance, is very high so that noise pickup and ground drops, characteristic of remote sensor applications, are minimized.Care is taken to provide high, well characterized stability of critical parameters under varying conditions, such as changing temperatures and supply voltages. Finally, all components that are critical to the performance of the IA are internal to the device. The precision of an IA is provided at the expense of flexibility. By committing to the one specific task of
2

//Program to illustrate the effect of overloading the comma operator.

on


#include<iostream.h>
#include<conio.h>
class loc
{
int longitude,latitude;
public:
loc(){};
loc(int lg,int lt)
{ longitude=lg;
latitude=lt;
}
void show()
{ cout<<endl;
 cout<<longitude<<"\t";
cout<<latitude<<endl;
}
loc operator+(loc op2);
loc operator,(loc op2);
};
loc loc:: operator,(loc op2)
{
loc temp;
temp.longitude=op2.longitude;
temp.latitude=op2.latitude;
cout<<endl;
cout<<op2.longitude<<"\t"<<op2.latitude<<"\n";
return temp;
}
loc loc::operator+(loc op2)
{ loc temp;
temp.longitude=op2.longitude+longitude;
temp.latitude=op2.latitude+latitude;
return temp;
}

int main()
{ clrscr();
loc obj1(10,20),obj2(5,30),obj3(1,1);
obj1.show();
obj2.show();
obj3.show();
obj1=(obj1, obj2+obj3,obj3);
obj1.show();
getch();
return 0;
}

Comments

Post a Comment